Protable gas detector PS1
|Category:||Fire and gas|
Protable gas detector PS1 monitors a single gas, for a variety of applications. Widely used in the oil and gas industry, this rugged, extremely lightweight and accurate monitor clips easily onto a collar or vest. This puts the instrument near the breathing zone for maximum user protection and safety. Audible, visual, and vibrating alarms alert the user, should gas be present and alarms can be latching until the user acknowledges that an alarm is present.
The PS1 Bump Test and Calibration Station
is designed to give a fast visual indication that instruments are calibrated correctly. Just place the instrument in the cradle and close the lid. Calibration is complete in 90 seconds and bump testing in
60 seconds. Results can be easily extracted for Calibration Certificate printing at your convenience.
Size: 85 (H) x 55 (W) x 29 (D) mm 3.4” (H) x 2.2” (W) x 1.16” (D)Temp. Limits: -20o to + 50o C (-4o to +122o F)
Humidity: 0-98% RH (non-condensing)
Alarms: Visual 360o Light bar / Vibrating / Audible 95 dB / User programmable, includes TWA, STEL
Rating: IP67 (Dust-tight and waterproof to 1m)
Outputs: Optical IR
Datalogging: 1 minute logging for 24hrs then over-writing
10 calibration logs, 50 bump test logs, ON/OFF session logs
￼Warranty: 2 years